Description
88751B Double Matte DTF Transfer Film
88751B is a double matte DTF transfer film for DTF graphic printing and textile heat transfer. It supports warm peel, cold peel, and instant peel workflows, allowing the peeling method to be selected after the complete combination of film, ink, hot-melt powder, heat press, and textile has been tested.
The supplied catalog lists 75μm film thickness and A4, A3, A3+, 30cm, 60cm, and 120cm size options. These formats support sample preparation, desktop printing, and continuous wider-format production according to the selected equipment and artwork size.
Machine Structure
88751B is a consumable transfer film rather than a printing machine. The supplied material shows the film in roll form. Its catalog-defined surface type is double matte, and its intended use is as a carrier medium within the DTF printing, adhesive-powder processing, heat transfer, and peeling workflow.
After DTF printing, powder processing, and heat pressing, the film can be peeled using a warm, cold, or instant peel method that has been verified for the target production setup.
Technical Specifications
| Model | 88751B |
|---|---|
| Product Type | Double matte DTF transfer film |
| Surface Type | Double matte |
| Peel Methods | Warm peel, cold peel, instant peel |
| Film Thickness | 75μm |
| Available Sizes | A4, A3, A3+, 30cm, 60cm, 120cm |
| Recommended Transfer Temperature | 140-150°C |
| Recommended Transfer Time | 8-12 seconds |
| Main Use | DTF graphic printing, powder processing, and textile heat transfer |
The supplied catalog does not list transfer pressure, powder-baking temperature or time, surface resistance, or release force for 88751B. These values are therefore not added to this page. Confirm the final process with the intended printer, ink, powder, heat press, and textile before batch production.
Product Advantages
88751B combines the catalog-defined double matte surface, three peeling workflow options, and a range of sheet and roll formats. The listed 140-150°C and 8-12 second transfer reference can be used as a starting point for process testing, while the final settings should be confirmed for the actual production combination.
- Double matte surface as specified for the 88751B model.
- Supports warm peel, cold peel, and instant peel workflows.
- 75μm film thickness listed in the product catalog.
- A4, A3, A3+, 30cm, 60cm, and 120cm options for different equipment and artwork sizes.
- 140-150°C and 8-12 seconds listed as transfer reference conditions.
- Suitable for DTF graphic transfer production after process verification.
Production Workflow
First, select the 88751B sheet or roll width according to the artwork and printer. Prepare the artwork in RIP software, then print the graphic layers onto the suitable printing surface of the film.
Apply hot-melt adhesive powder evenly to the printed area, remove excess powder, and complete powder melting according to the tested equipment settings. Place the prepared film and target textile in a heat press and use 140-150°C for 8-12 seconds as an initial transfer reference.
After pressing, choose warm peel, cold peel, or instant peel according to the validated process. Inspect graphic color, edges, coverage, and adhesion before proceeding to batch production. Transfer pressure, baking conditions, and peeling timing should be determined by testing the complete material and equipment combination.
Application Scenarios
88751B can be used for garment customization, personalized graphic production, small-batch DTF transfer work, and continuous wider-format DTF production. A4, A3, and A3+ formats suit desktop printing, samples, and smaller graphics, while 30cm, 60cm, and 120cm roll options support compatible continuous-output equipment.
After printing, powdering, melting, and heat transfer, the graphics can be applied to T-shirts, sweatshirts, polo shirts, canvas bags, caps, and other common textile products. Final results depend on the match between the film, ink, powder, heat press, textile, and production settings.
FAQ
What is 88751B?
88751B is a double matte DTF transfer film for DTF graphic printing and textile heat transfer. It supports warm peel, cold peel, and instant peel workflows.
What is the film thickness?
The supplied catalog lists 75μm film thickness for 88751B.
Which sizes are available?
The catalog lists A4, A3, A3+, 30cm, 60cm, and 120cm options. Select the format according to the equipment and artwork size.
What transfer settings are listed?
The catalog lists a transfer temperature of 140-150°C and a transfer time of 8-12 seconds. Transfer pressure and other process settings should be confirmed through testing.
Which peeling methods does 88751B support?
It supports warm peel, cold peel, and instant peel. The appropriate method should be selected after testing the target graphic, ink, powder, textile, and heat press.